Modifying a User for Outgoing FTP Connections

To modify information for a user or group for outgoing FTP connections, enter 1 in the Opt field for that user or group on the Work with Client FTP Security screen (STRAUD > 11 > 5) as shown in Setting Additional Controls for Outgoing FTP Connections.

The Modify FTP Client User screen appears:

​                            ​ Modify FTP Client User​                                                                                                               ​ Type information, press Enter.                                                ​    ​ User  . . . . . . . . .​ ​ TEVG      ​                                                                                                                              ​ Outgoing​                         ​ 1=Allow ​                                      ​ IP Address     ​ ​ Subnet Mask    ​ ​ 2=Reject​        ​ Text​                       ​  ​ *ALL           ​ ​ 0.0.0.0        ​    ​ 2​   ​                               ​        ​ 1.1.1.212      ​ ​ 255.255.255.128​    ​ 1​   ​ RLTOOLS                       ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​                                                                        ​      More...​                                                                                   ​ F3=Exit​  ​ F4=Prompt​  ​ F11=Alternate view​  ​ F12=Cancel ​                          ​                                                                                                                                                                  ​

The read-only User field shows the name of the user or group.

The body of the screen is made up of lines that can refer to different IP address ranges. To modify the information for the user, you can edit or clear existing lines or add new ones.

Possible field values include:

IP Address

The IP address that begins the range.

Subnet mask

The subnet mask for the address range. For a list of possible subnet masks, showing the number of addresses that the range would include, press the F4 key.

1=Allow 2=Reject

How Firewall responds to requests by the user for outgoing FTP connections to this IP range. Possible values include:

• 1: Accept
• 2: Reject

Text

A free-form text description of the rule.